Matters needing attention and maintenance of electric thermostat incubator:
1. The electric thermostatic incubator is not explosion-proof, so it is forbidden to put corrosive and flammable items into the box.
2. Do not put the electric thermostat incubator box in a corrosive environment containing acid or alkali to avoid breaking the electronic components. 3. Pay attention to protect the paint surface of the box of the electric thermostat incubator, which will affect the appearance of the box.
4. When not in use for a long time, the power supply should be cut off, and liquids are strictly prohibited from entering the machine to avoid damage to the host.
5. The working voltage of this electrothermal constant temperature incubator box is AC 220V, 50Hz. Before using, you must pay attention to whether the voltage of the power supply is consistent with the specified voltage, and effectively ground the grounding pole of the power socket according to the regulations.
6. When using electricity, do not touch the electrical parts of the space on the left side of the box with your hands or wipe with a damp cloth and rinse with water.
7. The power cord should not be entangled with metal objects, and should not be placed in a place with high temperature or humidity to prevent the rubber from aging and causing electrical leakage.
8. The test object should not be squeezed in the box, so that the air flow is smooth, keep the heat in the box uniform, and the bottom plate of the inner room is close to the electric heater, so it is not suitable to place the test object. In the laboratory, the air-top valve should be properly unscrewed to facilitate temperature adjustment in the box. 9. When placing precious strains and cultures in the electric thermostatic incubator, you should observe them diligently. If an abnormal situation occurs, cut off the power immediately to avoid unnecessary or unnecessary losses.
10. When not necessary, do not open the temperature controller to prevent damage.
11. After each use, the power must be cut off. Always keep the inside and outside of the tank clean and the water in the tank clean. 12. When the use temperature is high, you should pay attention to burns.
13. The fuse tube is installed in the space on the left side of the box. The side door needs to be opened during the replacement, and the power supply must be cut off. 14. The packaged electric thermostat incubator, under the conditions of observing the storage and use rules, from the date of delivery (use period of one year), if the product does not work normally, the manufacturer should replace or repair the user for free Components.
Bag Cosmetic,Beauty Cosmetic Travel Bag,Cosmetic Bag Make Up Box
Longzhao Technology (Guangdong) Company Limited , https://www.gdprincebag.com