Composite flexible packaging anilox roller cleaning agent use method

The anilox roller is a key component in the flexible packaging composite coating machine. In the coating process, the binder gradually forms a solidified layer in the anilox roller mesh cavity and blocks the cell site, resulting in insufficient sizing and resulting in decreased composite strength. The solidified layer that plugs the mesh is generally very difficult to clean from the mesh. Landmecker LDX-302 anilox roller cleaning agent (washing solution), which is characterized by easy to use, significant effect, does not require any auxiliary settings, in a short time can be in the network of ink, light oil, paint After the solidified layer is removed, it is restored to a clean anilox roll, maintaining its original ink transfer and coating effect.

Anilox roller cleaning agent usage method:

First, before using Landmecker LDX-302 solution, ask the user to wear rubber gloves and protective glasses.

2. Note: The surface of the anilox roll to be cleaned is required to be dry. If the surface of the anilox roll is filled with solvent, it will affect the cleaning effect. Be sure to dry the solvent and adhesive on the anilox roller with a dry cloth.

3. Open the protective cover of the washing solution bottle, apply the cleaning agent evenly on the surface of the anilox roller with a brush, and the washing solution must completely cover the surface of the anilox roller. The coating thickness is approximately 0.2-0.5 mm. . Wrap the anilox roll with PE or PP film.

4. Please wait for 15 minutes or so. At this time, you can clearly see that the adhesive layer has been peeled off, and all of them are peeled off with a copper brush or a rag.

5. Rinse the surface of the anilox roller with clean water or solvent and dry it. At this point, you can see that the anilox roller that has been cleaned exhibits metallic color and bright as new.

6. If there are still traces of residual cured material on the surface of the anilox roller, the first step is to completely dry the surface of the anilox roller, and then repeat the two to four cleaning procedures. If there are traces of ink or other cured material, multiple brushes are needed. several times. At this point, you must be able to get a clean anilox roller.