What should you pay attention to in the maintenance of the pad printing machine?

The pad printing machine is one of the printing equipments. It is an indirect printing technology that can achieve complete printing and decoration on the surface of the object. Compared with other types of printing equipment, the pad printing machine has good operation in use. Performance, printing performance. Xiao Bian here needs to remind everyone that if you want to improve the life of the pad printer, keep the printing efficiency, although doing basic maintenance work on a daily basis.

As the following:

1. The air pressure component can not make too much water and oil into the air pressure system, avoid cylinder failure and shorten the service life of the cylinder, and ensure the drying and cleaning of the compressed air. It is best to install a freeze dryer.

2, three points combination, to ensure that the use of pressure in 5-7kg / cm, daily check converter oil cup is enough, the pressure relief valve is not used for a long time. It should be pushed to the back end, and the air conditioning should use the medium oil R68# (ie the special oil for the pressure regulating group).

3. The other is to turn off the main power switch and compressed air source when stopping work; the speed control valve cylinder and the axis of each part should avoid magnetic loss; the components of the table slide and the precision height must be commonly used WD- 40 Wipe clean and oil to prevent the precision from being affected by rust.

Article source address: http://

Silicone Bottom Sleeve Cover

The information about our silicone bottom sleeve cover

• PREMIUM PROTECTION: Protective silicone sleeve, advanced shock absorbing silicone material helps protect against dent, scratch and damage from daily use.
• SAFE MATERIAL: Made with premium silicone rubber, BPA-Free and Toxin-Free, safe for all ages.
• MUST-HAVE ACCESSORY: Ideal for all outdoor activities, and durable for any surface to fully protect your bottles.
• Anti-slip soft silicone bottom sleeve prevents your bottle from bumps,dents and dings. Also, our hydroflask boots are compatible with other brands such as Simple Modern,Takeya,MIRA, Iron Flask .
  

YDS are specialized in Silicone Bottom Sleeve Cover , Silicone Bottle Sleeve ,Silicone Hand Sanitizer Holder,Silicone Sanitizer Bracelet,Silicone Bottle Holder manufacturers from China.

Our Factory Advantages:
1.Mold workshop and 2D and 3D engineer department
2.Solid siliccone compression machine and liquid silicone injection machine
3.Disney and Sedex 4P audit factory
4.ISO 9001,IATF16949,Raw material of FDA LFGB MSDS Certificates
Look forward to your cooperation!

Silicone Bottom Sleeve Cover,Silicone Water Bottle Cover,Durable Bottom Boot Sleeve,Non Slip Bottom Cover

Shenzhen Yindingsheng Technology Co., Ltd , https://www.dgoemsiliconeyds.com