What are the techniques of installing the caster of the constant temperature and humidity machine? The equipment is fixed and installed after the temperature, humidity and humidity are unboxed. When positioning, please confirm the dimensions according to the installation space requirements to ensure the maintenance space and the opening space. Haida Xiaobian today mainly talked about how to install the casters for constant temperature and humidity machines. The specific method is three steps:
1, lifting the turntable;
2, fixed base;
3, move the wheel.
1) First move the equipment and rotate the lifting dial clockwise. The fixed base will move upwards. Turn the lifting wheel of each wheel so that the fixed base of each wheel is off the ground. Ensure that all the moving wheels touch the ground. This will be convenient at this time. The mobile device to the desired location;
2) Next, fix the equipment, move the box to the desired position, and then lower the lifting dial counterclockwise to lift the moving roller so that the fixed base is in contact with the floor so that the box is basically fixed.
3) Use a spirit level to measure the level of the cabinet. The height of each part of the box can be adjusted by means of the lifting and lowering dials, and the rotation of each part is adjusted to an appropriate position and the rotation is stopped to ensure that the equipment is in a horizontal state.
Through the detailed introduction of Shanghai Da Instrument Co., Ltd., the user should know how to correctly install the caster of the constant temperature and humidity machine. If the operation method is still not very clear, you can contact the staff of Haida Instrument in a timely manner!
Article Source: Dongguan Haida International Instrument is not allowed to reprint without permission! (Or: if you need to reprint, indicate the source)