The correction tape is a kind of student equipment and is a good helper for students to learn. Nowadays, there are a variety of corrections on the market, but in general, it is a replaceable correction tape that can be replaced by a core tape, and the other is a disposable core tape. The following describes the repair method of the replaceable correction tape.
Repair method for replaceable correction tape:
method one:
First, take a piece of paper, preferably a draft paper, and put a posture on the top with a correction tape, but don't do it.
Then, gently wipe the paper, but don't use too much force, the speed should be like a regular match. Repeat the "wipe match" and fix it in a few moments.
The correction tape is one of the stationery commonly used by students. It can change the wrong word, also known as the correction tape. Correction of the use of the belt may encounter a broken situation, then how to deal with this situation? We know that during the use, if you press the correction tape hard, in the drawing, it will drag a big When the core paper is cut, the phenomenon of detachment occurs. Once this happens, the correction tape cannot be used smoothly. At this time, as long as the drawing is repeated on the smooth paper, the core paper will be automatically rolled back along the small wheel belt, and the drawing can be smoothly restored to the normal use state. The inside of the correction belt is a set of gears. The gears may be side by side or overlapped. Some of them are belt pulleys connected by belts. When used, the gear sets will automatically generate and send out the correction belt, but if the force is improper, the card may be stuck. live. Even the phenomenon of broken belts, and no paper strips can be drawn. This is also a common problem of correction tape damage. If this happens, you can refer to the following treatment:
Method Two:
1. Open the correction tape housing. Although there are many replaceable core correction tapes available on the market, the inner tape replacement can be purchased separately, but more is fixed inside and cannot be replaced inside. Fixed products with fixed non-replaceable cores are often difficult to open and can be opened with a ruler, Scissors or their tools.
2. Find the place where the broken belt is. After opening the correction tape smoothly, take out the pinion gear, find the broken tape, prepare the adhesive tape, and stick the broken tape with adhesive tape.
3. Put the gear back in place. After attaching the tape, the waste tape on the correction tape is looped onto the small wheel, and after two or three turns, the wheel is placed in the cover.
4. Can the test be used? Draw a few strokes on white paper, can not be out of the normal band, you can repeat the above steps, the normal use can be used smoothly.
The correction tape is the preferred stationery for students and office workers to quickly modify the wrong place. The replaceable correction band is more cost-effective than the one-time correction band.
LA Files, Lever Arch File, PVC files
Eagle (Guangzhou) Technology Development Limited , https://www.eagle-factory.com