[ Chinese wardrobe net ] For many girls, it is a happy thing to have a wardrobe of their own personality, so custom wardrobes have become a demand, loved by consumers, custom wardrobes, not only can make wardrobes The design style makes you satisfied, and you can make reasonable use of the room space. How much do you know about the design of the hanging wardrobe? Let's take a look at how the hanging wardrobe is designed for the overall size of the wardrobe.
Hanging wardrobe design size specification:
The wardrobe that is involved in planning and design by ourselves not only makes rational use of the space at home, but also meets the needs of the owner in terms of use. However, some people adjust the size of each function according to personal preference when customizing the wardrobe. However, this unreasonable design leads to various troubles in the future.
Generally, the custom-made wardrobe is made of 2400mm high and 1800mm long, and is divided into two units of 900mm long, and the depth of the cabinet is 600mm. This not only makes it practically easy to use, but also greatly increases the firmness of the wardrobe. Blindly expanding or narrowing certain areas not only causes inconvenience in future use, but is also more likely to cause hidden dangers in the wardrobe.
In the reclamation area, depending on the usual height of the quilt, this area is usually 400-500 mm high and 900 mm wide. This space is mainly for storing quilts that are not used for seasons. Because it is inconvenient to take items, it usually makes the upper end of the closet a bedding area, which is also good for moisture prevention.
Stacking area, this area can be designed as an adjustable movable layer, which can be changed according to the needs of the height or changed to other areas. For example, when the clothes are increased, the clothes rail can be changed to the top area. This area is mainly used for stacking sweaters, T-shirts, casual pants and other clothing. It is best to arrange it in the area between the waist and the eyes for easy access. According to the width of the general clothing after folding, the cabinet width should be between 330-400mm and the height is 350-400mm.
Long clothing area, high 1400-1500mm, not less than 1300mm. The long-sleeved area is mainly used for hanging long-sleeved clothes such as windbreakers, down jackets, overcoats, dresses, and dresses. The width of the long-sleeved area can be designed according to the number of pieces of long clothes that you own. It is usually 450mm wide and can be used by one person. If more people use it, they can be widened or designed with multiple long-sleeved areas. In addition, if the space is not particularly tight, it is recommended to choose a depth of 600mm, so that the clothes are more comfortable.
The top area is 1000-1200mm high. The top area is used to hang pleated tops such as suits, shirts, and jackets. In order to facilitate the release of the clothes hanger between the clothes rail and the top of the cabinet should be greater than or equal to 60mm. According to the normal length of the clothes, in order to prevent the clothes from being dragged to the bottom of the board, the clothes rail should be greater than 900mm between the bottom plates. Also note that depending on the height of the individual, the distance from the clothes rail to the ground should not exceed 1800mm, otherwise it is not convenient to take.
Drawer, width 400-800mm, height 190mm. This area is mainly used for storing underwear. Generally, 3 or 4 drawers are designed under the top area, which is mainly used for storing underwear. According to the height of the underwear rolled up, the height of the drawer can not be lower than 190mm, otherwise it is easy to clamp the clothes when closing the drawer.
Plaid: The height of the grid is between 160 and 200 mm. This area is mainly used for storing ties. Since there are clips for fixing the tie, there is no need for too much space.
Pants rack, high 800-1000mm. The trousers rack is designed for hanging pants and is not easy to wrinkle. All trousers are folded up and down, so the distance from the hanging rod to the bottom plate should not be less than 600mm, otherwise the trousers will be dragged onto the bottom plate. It is recommended to buy a wardrobe with non-slip pants to prevent the pants from falling; while the pants are easy to fall.
The above is the overall size specification that needs to be considered during the design process of the hanging wardrobe. Do you understand? If you want to have a unique hanging wardrobe of your own design, then we must know that the overall wardrobe we need to design is the most suitable. What is the size specification, so that we can customize our hanging wardrobe for our room. If you want to know the size of the hanging wardrobe design, let’s take a look at how Xiaobian introduces it. I believe the above introduction will definitely help you. .
A4 File Folder,Portable A4 File Folder,Large Capacity A4 File Folder,Plastic A4 File Folder
TAISHAN JINRI STATIONERY PLASTIC CO.,LTD , https://www.jinri-folder.com