(1) Test the fountain solution in the water tank multiple times with a pH test paper or pH meter every day. Check the pH sensor once a month to confirm whether there is any deviation and adjust accordingly.
(2) Temperature control of fountain solution. The temperature in the water tank should be 8 ° C to 10 ° C, and the temperature of the fountain solution in the water tank should be 12 ° C to 15 ° C.
(3) In daily printing, the pH value should be 4.8-5.3 for rubber products. For gold, silver ink and other special inks, the pH value should be 6.0-7.0.
(4) If isopropyl alcohol (IPA) is used, the purity must be above 99.9%, and the amount added should not exceed 5%. When the amount is exceeded, the operator should take measures to prevent the poisoning of organic solvents.
(5) A large amount of dust, paper powder, ink and cleaning liquid will be mixed into the fountain solution to personalize the printing, so that the water quality will change. Therefore, the current fountain solution should be released every week. The system is thoroughly cleaned and replaced with new fluid.
Landscape Artificial Grass,Fake Green Grass,Grass Floor,Flat Roof Artificial Grass
Changshu Keyuan Eco-friendly New Materials Co.,Ltd , https://www.alqartificialgrass.com