US61M / PGM7300VOC detector
Product type: Pump suction VOC detector
Product description: US61M / PGM7300 is a simplified broad-spectrum handheld volatile organic compound (VOC) gas detector, using RAE's latest third-generation photoionization detector (PID), with a detection range of 0.1-5000ppm.
Technical Parameters
Dimensions: 25.5 × 7.6 × 6.4 cm
Weight: 738g (including lithium battery)
Sampling method: Pump suction shell Material: engineering plastic, rubber jacket Protection level: IP66, waterproof, dustproof and electromagnetic radiation resistance: EMI / RF level: EMC Directive 89/336 / EEC
Working temperature: -20 ℃ ~ 50 ℃
Ambient humidity: 0% to 95% relative humidity (no condensation)
Display: large-screen graphic LCD display, with automatic backlight display content: real-time detection value, peak value, battery voltage key: 1 operation key, 2 function keys, 1 lighting switch alarm mode: 95dB @ 30cm buzzer , Red LED
Alarm signal: gas exceeding standard, insufficient battery voltage, sensor failure alarm point setting: separately set high / low alarm limit sampling pump flow rate: 450 ~ 550cc / min
Battery: 4.2V / 3300mAH rechargeable lithium-ion battery, alkaline battery box uses 4 AA batteries Operating time: can work continuously for 12 hours (depending on working environment and frequency of use)
Charging time: 8 hours Calibration method: Zero / extended calibration Sensor configuration: 10.6eV UV lamp PID sensor sensor parameters:
Detection range: 0.1 ~ 10000ppm
Resolution: 0.1ppm
Response time (T90): 2s
Detection accuracy: ± 5% of 10-2000ppm isobutylene calibration point
Detailed introduction of the main features • The third-generation PID sensor with short response time and wide detection range • Large-screen graphic LCD display, graphical menu display • Automatic backlight display, built-in lighting for easy use in dark environments • Built-in temperature and humidity pressure sensor, automatic Humidity compensation to ensure measurement accuracy Sex battery
Standard configuration • PGM-7300 main unit, including sensor and UV lamp • Lithium battery, travel charger • Rubber protective cover • Intake pipe and water trap filter • Operating manual • Information and software CD • Portable soft case
Optional accessories • Alkaline battery adapter • Charging base • Data cable (USB or RS232)
• UV lamp cleaning kit • Calibration gas
Application areas • Indoor air quality testing • Environmental protection monitoring
As the name suggests, the Sit Stand Desk is a table that can be raised and lowered, so the lifting function is the biggest feature of this Height Adjustable Table. The lifting column is up and down through the control of the control box. Therefore, the most important part of an Electric Adjustable Desk is the lifting column (including the motor), the control box, and the hand controller. Without one of these three parts, the lifting function cannot be realized. The two lifting columns of the Dual Motor Standing Desk are controlled by two motors, and the stability and fluency of the dual-motors are more prominent among similar products.
3 Stage Standing Desk,Adjustable 3 Stages Standing Computer Table,Adjustable Standing Desk 3 Stage,Dual Motor Office Adjustable Height Desk
CHEX Electric Standing Desk , https://www.chexdesk.com