In many small snacks in our lives, candy is packaged and produced by a pillow-type packaging machine. The packaging style of the automatic pillow packaging machine meets national safety and health standards. Automatic pillow packaging machines occupy a large market share in the packaging machinery industry, and the development of the food market brings a broader development market for packaging machines. Many customers do not fully understand the pillow-type packaging machine, and the maintenance of the pillow-type packaging machine is only the tip of the iceberg. In fact, the maintenance of a comprehensive pillow packing machine is divided into three steps, mechanical parts, electrical parts and mechanical lubrication.
First talk about the maintenance of the electrical part: online exchange QQ
★ The operating personnel of the pillow packing machine should always check the looseness of the thread at each joint before starting the machine;
★ Small particles such as dust may also affect some of the functions of the packaging machine. When photoelectric switches and probes close to the switches are in dust, they can easily cause malfunctions, so they should be checked and cleaned frequently.
★Detailed parts are also the focus of mechanical cleaning, such as regularly cleaning the surface of the electric slip ring with a soft gauze and alcohol to remove the toner from the surface (Note: Cut off the power during operation).
★ Some parts of the pillow packaging machine can not be arbitrarily changed, non-professionals must not open the electrical part, inverter, microcomputer and other control elements of the parameters or procedures have been set, random changes will cause the system to disrupt the normal operation of machinery.
The second is the lubrication of the pillow packing machine:
★ Rolling bearings are the parts where the wear in the machinery is more serious, so each rolling bearing should be filled with butter once every two months;
★ Different types of lubricants are different, such as the sleeves on the packaging film roller, the shaft sleeve at the front sprocket of the feeding conveyor should be filled with 40# mechanical oil at the right time;
★ The occlusal operation of the gear is also very important, each gear should be timely instilled 40 # mechanical oil;
★ The lubrication of the chain is the most common, relatively simple sprocket chain should be timely instilled mechanical viscosity greater than 40 #;
★The clutch is the key to the start-up of the packaging machine, and the clutch part should be greased at the right time.