Three wooden wardrobe maintenance methods
[ Chinese wardrobe net ] 1, board wood combined wardrobe
Sticking veneer wardrobes and pastoral wardrobes are its representatives. Solid wood frame, the part of the surface is made of MDF. The combination of board and wood just takes into account the characteristics of solid wood load bearing and MDF's not easy to deform! The cost is relatively cheap!
Maintenance:
1 Always keep the door clean, and there should be no debris or dust in the track. When cleaning, use a semi-wet rag to wipe the cabinet and cabinet door. Never use corrosive detergent. The dust of the track can be cleaned with a vacuum cleaner or a small brush, and the metal parts such as the frame and the tie rod are wiped with a dry cloth.
2 You only need to wipe with a clean rag, but if it is dirty, you can use soap or neutral detergent and wipe it with a damp cloth.
3 UV is also destructive to wooden wardrobes, so it is necessary to use cloth or curtains to avoid sun exposure.
4 Avoid the use of irritating and corrosive chemicals such as alcohol and detergents that are easily damaged by wood.
5 If you want to wax, it is best to choose a wax with a high concentration and solid content, no silicon, so as not to damage the paint surface.
6 When using the sliding door for a long time, the dust-proof strip may have a slight glue drop, and it can be glued with double-sided tape; the lower track positioner has a gap in the position, and the flat positioner is used to align the positioner to the side plate to push to The seam can be closed; the sliding door is tilted, and the tilt to the right adjusts the "loose" sign of the left bottom wheel or the "tight" sign of the right bottom wheel.
2, solid wood wardrobe
From the appearance, the natural texture, feel and color of the wood are exactly the same as the solid wood wardrobe, which is difficult for the average consumer to distinguish. But in fact, the wardrobe of solid wood and wood-based panels, that is, the doors and drawers are made of solid wood, side panels, top, bottom, shelves and other components with thin wood veneer particle board or medium density board fiberboard. This process saves wood and reduces costs.
Maintenance:
1 When cleaning the solid wood wardrobe, just wipe it with a clean soft cloth; if it is dirty on the surface of the wardrobe, you can choose to use a damp cloth with a proper amount of soapy water or a neutral detergent. But the force is too strong.
2 During normal use, avoid hard objects and sharp objects or scratch the wardrobe cabinet or door panel.
3 Newly bought solid wood wardrobes, you should open the door ventilation, or put some tea on the floor of the cabinet to let some of the odors dissipate as quickly as possible.
4 If you encounter a humid climate, open the closet to provide ventilation, or place some desiccant in the corner of the closet to prevent the mold from becoming too moist.
5 After using for a period of time, after thoroughly cleaning the wardrobe, a layer of light wax can be applied to the surface, which can make the wardrobe bright and new, and on the other hand can effectively extend the life of the wardrobe.
3, pure solid wood wardrobe
Pure solid wood wardrobes have high requirements on craftsmanship and materials. All materials are solid wood, including the door panels and side panels of the wardrobe, all made of solid wood, and no other forms of wood-based panels are used. Solid wood selection, drying, finger jointing, seaming and other requirements are very strict, if any process is not tight, small cracking, loose joints and other phenomena, large sets of wardrobe deformation, and can not be used.
Maintenance:
1 Pay attention to the cleaning and maintenance of the wardrobe surface. Regularly wipe off the dust on the surface with a soft cotton soft cloth. At intervals, use the squeezing wet cotton thread to clean the dust from the corners of the wardrobe, and then use a clean dry soft cotton cloth. .
2 Remind everyone to avoid using alcohol, gasoline or other chemical solvents to remove stains. If there is stain on the surface of the wardrobe, do not rub it hard. Use warm tea to remove the stain gently. After the water evaporates, apply a little light wax to the original part, then lightly wipe it several times to form a protective film.
3 Avoid hard objects scratching. When cleaning, do not let the cleaning tools touch the wardrobe. Usually, be careful not to let the hard metal products or other sharp objects collide with the wardrobe to protect the surface from scratches.
4 Keep away from heat. In the winter, it is best to place the wardrobe at a distance of about 1 meter from the heating flow to avoid high-temperature baking for a long time, causing local cracking of the wood, deformation and deformation, and local deterioration of the paint film.
5 pure solid wood wardrobe should be used to keep the environment stable, especially the temperature and humidity should not be drastically changed, otherwise it will lead to deformation of the wardrobe.
6 Avoid direct sunlight. Try to avoid the long-term exposure of the outdoor sun to the whole or part of the wardrobe. It should be placed in a place where it can escape from the sun, or use a transparent gauze curtain to separate the direct sunlight, so that it does not affect the indoor lighting. It also protects the interior wardrobe.
The dual motor Standing Desk is 1.5-2.5mm thick cold rolled steel plate with high mechanical strength, smooth surface and uniform thickness.
Adopt the quality motor of which listed company to ensure that the lifting is not stuck, the lifting speed is 32mm / s.the sound under no load is less than 45dB, quiet and noiseless, and does not affect other people's office.The motor has strong power, stable power output and stable load bearing of 80kg, which can meet the needs of daily entertainment and office desktop storage. Colleagues can cooperate with the function of resistance retreat and power-off protection to ensure the safety of lifting. The power in standby mode is only 0.1W, energy saving and environmental protection.
Dual Motor Standing Desk,Standing Desk Dual Motor, Electric Standing Desk Dual Motor, Sit Stand Desk Dual Motor,Electric Sit Stand Desk Dual Motor
Suzhou Uplift Intelligent Technology Co., Ltd , https://www.uplift-system.com