Hot summer It is almost past, autumn, wood boards are affected by the hot and humid climate, there will be expansion and contraction. A few days ago, Wang Shiwei, a design and research institute, suggested that the public should carry out sheet metal curing from the following aspects.
Wang Gong said that all kinds of plates need to be dusted frequently. Usually, brooms or vacuum cleaners are used to remove dust, and places that are often trampled are more diligent in vacuuming. Pay special attention to the entrance hall and the walkway leading to the outside. In addition, in order to prevent dust from entering the house, you can place a dustproof pad at the entrance or install a dustproof strip at the bottom of the door.
In household cleaning, people always like to wipe the board with a damp cloth. Experience has shown that dry rub is better than wet. If you use wet mop, it is better to wring the mop and then use it. If the mop is too wet, the water will seep into the joints and damage the board, causing the board to be deformed, especially wood, plastic and cork.
In addition, carefully select the appropriate sheet care products, choose the water-based wax suitable for the board, use only one kind of wax at a time, if you use different wax products, it will react and make the board sticky and dirty. In use, the amount of wax should be appropriate. If the coating is too thick, the dust will be more easily adhered to the board, but it is more difficult to polish the board.
In order to prevent the moving items from damaging the board, experts suggest that you should be careful when moving the furniture. Try to use the lifting method to avoid dragging to avoid scratching the board. At the same time, in order to make the sheet lacquer shiny, it is best to add cloth to the bottom of the furniture. Set or add spacers.
painting kitchen cabinets,kitchen pantry cabinet,rta cabinets,pantry cabinet
Guangdong Planet Cabinetry Co., Ltd. , https://www.cnplanetcabinetry.com