Shanghai Xinzhuang Instrument Co., Ltd. anaerobic incubator operation matters
Shanghai Xinzhuang Instrument Co., Ltd. is a company specializing in R&D, production and sales of low temperature experimental equipment and ultrasonic equipment. The company has professional temperature control technicians and advanced production equipment; perfect production process; to ensure product quality; to achieve safe production.
The anaerobic incubator operation items enter the operation procedure: a. The sleeve should be placed on the flange of the porthole and fixed by the “O†ring; b. Place the sample or equipment on the shelf of the outer door and lock the outer door; c. Remove watches, rings, bracelets or other jewelry that may break the cuff; d. Put the cuff on the forearm (you can use talcum powder); e. Use the foot switch to vacuum the cuff and then use the “Gas†to inflate , the operation is repeated at least once; f. Loosen the inner door lock; g. fully open the inner door until the inner door is sucked by the magnet on the inner wall of the incubator; h. The operator can now operate inside the incubator. Exit the operating procedure: Place the sample/equipment to be taken out on the shelf and close the inner door. Cultivation: The inside of the incubator is separated into two layers by a shelf. It is recommended that: a. Place the plate on the pallet; b. Do not stack more than 10 plates; c. If pre-tilt plate is used, it is guaranteed to be prepared; d. If the plate needs to be cultured for more than 72 hours, it is recommended to use a top open bag or a suitable container to prevent air drying; e. The plate on the front edge of the shelf should not stack more than 6 One.
The operation inside the incubator and the movement of the items into and out of the incubator: the moving in and out of the sample and equipment, and the movement of the operator's hand into and out of the incubator are done through the porthole. The pallet can hold 10 90mm plates, and each porthole has a pallet.
Note: The operation in the incubator should be as gentle as possible, especially when entering and exiting. If the action is large, the air pressure in the tank will change and the gas will be wasted.
Shanghai Xinzhuang Instrument is energy-saving and environmentally friendly, and is leading domestically. Professional manufacturing is more secure and affordable.
leather corner sofa,Corner Sofas,large corner sofa,corner chaise sofa
Guangzhou LoPhiDa Co.Ltd , https://www.guangdongwidinlsa.com