Overall wardrobe design, what are the overall wardrobe design standards?
[ Chinese wardrobe network ] [Chinese wardrobe network ] No matter which kind of overall wardrobe design, there are design standards, whether the overall wardrobe door frame or load-bearing board has corresponding standard requirements, then what are the overall wardrobe design standards? Let's take a look Let's go.
Overall wardrobe design standard one
For the side panels and laminates of the closet, it is necessary to use 18mm thick melamine pressure medium density fiberboard. The cabinet board should have the national authoritative test report, in line with the national mandatory standard GB18584-2001, formaldehyde emission ≤ 1.5mg / L, water content between 5-11. The back plate does not need to bear the weight, it can be made by 5mm thick, which can save cost. If the condition allows, the thickness of the door and back plate should be 9mm. However, if it is a hanging cabinet, the backboard needs to have a thickness of 18mm and a density standard of 0.6-0.9g/cm3 to enhance the firmness of the hanging cabinet.
Overall wardrobe design standard two
Although the overall wardrobe is a tailor-made product, there are also standard and non-standard parts. The standard parts are calculated according to the specifications of the board. The board can be used to maximize the edge, the sealing is generally uniform, and the black line is not visible. And sawtooth prints. Non-standard parts will waste a lot of plates, so the price will be more expensive.
Overall wardrobe design standard three
The metal frame of the closet door has a carbon steel and aluminum frame. Carbon steel is easy to rust, and currently it is dominated by aluminum. Aluminum materials include aluminum-magnesium alloys, aluminum-titanium alloys, and the like. Titanium has high strength, small specific gravity and high price. In fact, even aluminum-titanium alloys have the problem of high titanium content. In general, with the fingers, the aluminum-titanium alloy sounds crisp and the metal feels stronger. The minimum metal wall thickness is required to reach 1.1mm.
Overall wardrobe design standard four
The wardrobe door panel is made of glass, plate and other materials. The thickness of the glass is 5mm. The texture is available in frosted glass, clear glass, cloth glass and embossed glass.
Overall wardrobe design standard five
The material of the sliding door track is: aluminum alloy, galvanized steel. The styles are: insert ceiling, side suspended ceiling, single rail, double rail. Door rails should be equipped with anti-collision dustproof devices and positioning systems. Prevent heavy objects and sharp objects from hitting the track, keeping the track straight and smooth.
Overall wardrobe design standard six
Top and bottom wheels, ordinary door wheel housing is electroplated, easy to rust, the wheels are made of ordinary engineering plastics, easy to wear? High-grade door wheels are stainless steel, high-precision bearings, smooth, no swing, special pulleys Anti-jump device. The wheels are made of carbon fiberglass and can be pushed and pulled more than 100,000 times under a load of 180 kg. Some use ordinary plastic (may be engineering plastic or nylon) door wheel, oil on the door wheel to reduce the sound, cover up the defect, but in the future, it will stick a lot of dust, leaving behind trouble.
Coffee Tamper , Coffee French Press, Vietnam drip pot, coffee shot glass, espresso shot glass, portafilter funnel, espresso machine cleaning brush, wood brush, Milk Jug , espresso pitcher, ice cold brew Coffee Maker , V60 dripper, V60 filter paper, ceramice V60 dripper, filter paper holder, Coffee Knock Box, drawer knock box, Coffee Kettle , Coffee Grinder, manual coffee grinder, 304 stainless steel coffee beans grinder, high quality manual coffee grinder, wood handle coffee grinder
Coffee Tools,Coffee Accessories,Espresso Accessories,Coffee Maker Machine
Jiangmen Chang Kun Industrial Co., Ltd. , https://www.changkun-houseware.com