How to quickly learn to use the aging chamber? The correct operation steps are very important to the equipment, not only can reduce the test error but also reduce the incidence of failures. Here, Haida technicians sorted out the test steps of the next aging test box and share it with everyone:
First, the use of steps
1. Turn on the power and check if the power is normal.
2. Turn on the main switch of the power supply.
3. Set the test temperature value as instructed. Turn the rotary knob to the set point and align it with the desired temperature. The set temperature is within the maximum temperature range of the test chamber.
4 , set a good test time.
5 , when heated to the set temperature, should be based on the amount of exhaust demand, open the exhaust valve to facilitate convection heat.
6. The sample is placed in the test box. The test method of the sample should be selected. It must be completed before starting the machine.
7. After the test is completed, remember to turn off the main power switch of the unit.
Second, have the following security protection:
1. During stable operation or over-temperature condition , the cooling air duct starts to open, keeping the temperature in the equipment room constant.
2 , over-temperature protection device: circulating fan failure or heater out of control, cut off the heating system and aging power supply.
3 , empty incineration protector: When the heating tube surface temperature rises to 100 °C , cut off the heater power.
4 , a no fuse switch: overheat protection of the heating tube.
5 , no fuse switch: system over-current protection.
6 , indicator, buzzer alarm device: over-temperature motor over-current alarm buzzer alarm.
7 , the exhaust fan between the load stops running, cut off the load power.
8 , the system configuration of smoke alarm device, load between the three .
9 ã€Power Supply: Use three-phase five-wire system 380V50HZ , power 84KVA .
    How to quickly learn to use the aging chamber? I believe that many users are very familiar with the operation of the aging test box. Haida Xiaobian hopes that those users who have just purchased or have not purchased and who are not very skilled in the operation of the equipment will become familiar with it as soon as possible. I hope the above introduction can help everyone.