How to avoid small mistakes made by uv flatbed printer
The operation of the uv flatbed printer is simple, but for those who are new to the uv flatbed printer, they will still encounter some problems more or less. If the printing quality is wrong, what should I do?
In the printing production of uv flatbed printers, image quality production errors will be caused by factors such as nozzle failure, media placement and height adjustment, mainly due to ink dripping or ink leakage from the nozzle, or the nozzle is too close to the material medium, causing the nozzle to wipe the surface of the medium Damage the picture quality. The printed material must be placed flat, which is much better for equipment with a suction device. Of course, there is another reason that the printing material is too transparent or too thick. At this time, the printing material needs to be reloaded to ensure a smooth surface, and the opaque printing material must be replaced.
During the printing process of the uv flatbed printer, there are occasional drops of ink. This is usually because the filter in the air filter on the secondary ink tank is wet, resulting in poor ventilation.
This may also be caused by dirt and other dirt on the nozzle of the uv flatbed printer. When the dirt accumulates to a certain extent, the ink will drip automatically. To solve this kind of problem, the air filter needs to be replaced, and the spray head needs to be cleaned with a special cleaning solution, and a detailed inspection of the two edges of the light box cloth should be made to see if there are any extra burrs. If there are burrs, you can Use a lighter to deal with it simply.
After the uv flatbed printer transmits the print data, its indicator light will keep flashing all the time, even if the start button is pressed, the uv flatbed printer still cannot print. This is also a common print production failure, which is difficult for inexperienced operators to deal with.
It should be noted that if the uv flatbed printer performs an incorrect termination of the printing operation during the printing process, even if the printing job is stopped, some residual print data will still be transferred to the uv flatbed printer on the computer side, and its memory will still be retained With these printing data, it seems to the uv flatbed printer that these data are invalid, so the printing work cannot be realized, and it will cause the subsequent printing work not to be carried out normally.
I hope that the above editors can help you. If you still don't understand technically, please consult professional technical personnel to avoid causing other problems. 
Editor in charge: null
Our linear actuator widely used for home , office ,robotics, cabinets, home care beds, massage chairs. One of the main advantages of a track actuator is the ability to provide the same travel distance as a standard actuator, without increasing the overall dimension of the device.
It`s easy to Install and integrate with just about any application. In just a few seconds you can adjust the height to your needs. Actuators are ideal solution for your need.
Home Electric Linear Actuator,24V Linear Actuator,Linear Actuator For Solar,Linear Actuator Waterproof,Small Linear Actuator
Suzhou Uplift Intelligent Technology Co., Ltd , https://www.uplifting-desk.com