How should the extraction part of the DeLong coffee machine be cleaned?
As people's living standards have increased, coffee drinks have entered people's lives. A wide variety of coffee machines are available in cafes, restaurants, restaurants, entertainment venues, star hotels and more. In the daily life, the maintenance and cleaning of the coffee machine ensures the longevity and quality of a coffee machine. Next, Xiaobian introduced the Delong coffee machine cleaning method to the DeLong coffee machine.
    First of all, when cleaning the extraction part of the DeLong coffee machine, first turn off the machine, do not pull the power supply, wait for all the indicators to go out. Then, open the coffee machine extraction part of the cover, take out the drip tray and coffee grounds, and press the red release button on both sides of the extraction part to remove it.
    It should be noted that the extraction part of the DeLong coffee machine can only be taken out when the machine is in the closed state. Forcibly removing it when the machine is turned on will damage the coffee machine.
    When cleaning the DeLong coffee machine with water, there is no need to wash the conditioner, do not wash it in the dishwasher, carefully clean the inside of the coffee machine, remove the coffee residue inside the machine, and use the wooden or plastic fork for auxiliary cleaning. The coffee residue can be absorbed by a vacuum cleaner.
    After cleaning, when reinstalling, install the Delong coffee machine by sliding on the bracket and press the “PUSH†button at the bottom to hear the click sound. Then check if the red release button pops up correctly, otherwise the extraction part cover cannot be closed. Then install the drip tray and the coffee grounds holding box, then close the extraction part of the cover.
    Finally, some of the stamping equipment, trays and slag boxes of the Delong coffee machine itself should be cleaned and cleaned daily, so that the residue does not cause odors overnight, and the stamping equipment does not get stuck. In order to drink a good quality coffee drink, I hope to develop the habit of cleaning and maintenance.
Multifunction design, it can be used as angle scraper, glass glue blade, adhesive residue scraper, and seam repair tool.
The spatula is finished with corners with different angles, allowing you to choose the appropriate tip for the job.
It does not scratch the surface on which the silicon is being Now you can prevent any loose edges of silicone that trap moisture.
Caulking Tool Kit,Professional Caulking Tools,Caulk Finishing Tool Set,Silicone Calking Tool
jiangsu concentric internatinal ltd , https://www.concentric-corp.com