Gore-tex hiking shoes testing process[Photos]Read more>>
[first pass] [second pass] [third pass]
Three Gore-tex hiking shoes leak detection procedures - 1
The underwater pressure test puts the gore-tex socks into the water tank after being pressurized and pressurized.
Check whether the socks have been damaged or leaked. If a series of blisters appear, it indicates that the gore-tex socks have been damaged.
Socks are gradually put into the water tank
Put the gore-tex socks into the water tank and pressurize the air. Observe whether the whole sock has stringy bubbles coming out, especially if the bead is tight.
After leaving the water, the staff checked whether the pressure strip was tight
The breathability of gore-tex fabrics and goretex-xcr fabrics contrasts with gore-tex on the left and goretex-xcr on the right.
After inflation, it can be clearly seen that a large number of bubbles appear on the surface of the goretex-xcr fabric.
From the side of the effect is more obvious that goretex-xcr fabric permeability is stronger than goretex fabric but not to say that negate goretex fabric, but the characteristics of the two different fabrics, suitable for different environments.
console table modern,table console,hallway console table,console tables living room furniture
Kumusi (Dongguan) Furniture Co., Ltd. , https://www.kcoffeetable.com