The Canadian company Alex Coulombe Ltee has invested in a new modern filling line provided by KHS for the filling of Pepsi's products with a production capacity of 70,000 cans/h. The Innopal AMIASH destacker is a recessed design that guarantees reliable and gentle unloading procedures. Use ionized air for flushing. The principle of flushing is to spray cans with ionized air to remove all static electricity and clean the cans. The advantages of the filling process are smooth and low-foam filling, low oxygen intake and low carbon dioxide losses. As a result, the consumption of the filled product is reduced, and the period of the loan is extended so that the stability of the product flavor can be improved. Currently, the company only fills 355ml of Pepsi-Cola products. However, there is no problem even if you want to fill other specifications. It is worth mentioning that when it is necessary to change the tank type, the gas return pipe must be replaced, thus saving time and cost. The metering device on the system is suitable for the measurement of proportional flow. Syrups or concentrates are continuously added to the water according to a predefined recipe and the process is precisely controlled by a precision medium flow metering device. After the filling is completed, the canister is conveyed to the encoder via a spacious buffer. Before the coder prints the unique code on the can, the liquid adhering to the outside of the can is blown away first. Then, the second filling component inspection was performed again. For 24 cans of palletized products, the cans will be accurately loaded into empty plates, and the cans and pallets will continue to be moved. Even if it is a difficult form of packaging, the stacking process can be carried out easily and reliably; the packaging speed is high and the accuracy is high. (Wang Lan)