Why do I prefer furniture solid wood laminate?

As the weather gets warmer, more and more families will start to decorate their new homes. So many people will care about a problem. What kind of furniture should I use to fill my home? Choose particle board or multi-layer board ? Today, Xiaobian will come to share with you the two materials.

Solid wood particle board

After the wood particle board is produced using the process sheet particleboard, MDF, and the principle is the same, particles made of wood or other lignocellulosic materials, the use of both sides sandwiching a long fine quality wood fiber wood fiber, gum adhesive application Synthetic wood-based panels.

Solid wood laminate

The solid wood multi-layer board is also called plywood. It is based on the multi-layer board which is arranged in a crisscross pattern. The high-quality precious wood is selected as the panel. After being coated with resin glue, it is made by high temperature and high pressure in a hot press.
Choose the bedroom space created by Penghong Ecological Board

From the analysis of raw materials, the raw material of the multi-layer board is the rotary-cut veneer of the large-diameter wood, which means that the raw material is closest to the solid wood, and the quality of the finished board is easier to control. The particle board uses some crumbs, wood chips, residue, and even some waste paper boxes, broken old doors and windows, old floors and other materials, raw materials are difficult to control, resulting in the quality of the finished board is uneven.


In terms of physical properties, since the multi-layer board is flattened by horizontal and vertical veneer, the uniform force of the horizontal and vertical makes the multi-layer board have excellent physical properties. However, the coefficient of dry shrinkage expansion inside the multilayer board after high-temperature hot pressing is small, and there is almost no deformation or cracking, which increases the stability of product quality. However, the particle board does not have the above performance advantages due to its structural reasons.

Since the various physical properties of the multi-layer board are stable and easy to process, when the furniture is made, it can be separately constructed by the woodworker, and the work can be performed by using a hand saw or a precision saw without causing chipping or cracking. Due to the unstable performance of the particle board, it is generally completed by large equipment of large manufacturers.

In terms of nail holding power, there is an essential difference between the two. The nail holding force of the sheet basically depends on the physical properties of the sheet itself. Due to the unique production process inside the multi-layer board, even if it is disassembled many times, the nail holding force of the board is still guaranteed. The particle board is not the same as the particle board. Generally, the nail holding force is difficult to guarantee. It is easy to loosen the whole furniture by multiple disassembly and assembly.
Tatami made from Penghong Eco-board
The amount of glue used in the multi-layer board is small, because the multi-layer board is made by layer-by-layer veneer pressing, and the amount of glue is small, and it is easy to control in environmental protection. After using the aldehyde-free vegetable gum, the multi-layer board Environmental performance is often higher than the E0 level. The particle board is not the same, the particle board is also a kind of particle board, the amount of glue is large, many companies will choose cheap glue in order to reduce the cost, such finished board is greatly reduced in environmental protection.


Although the particle board is much worse than the multi-layer board in terms of material, environmental protection and physical properties, the particle board is cheaper in cost, so most domestic manufacturers prefer to use the particle board to make furniture. The multi-layer board is slightly higher in cost due to the choice of solid wood core. Therefore, when selecting the board, you should also see whether it is cheaper to choose, or choose environmentally friendly and better stability.

In summary
Multi-layer boards are superior to particle boards in all aspects from processing to physical properties, and are naturally more suitable as materials for furniture.

Penghong plate core plate and middle plate mainly use native poplar wood grown in the cold forest area above 45 degrees north latitude (some markets are also called “golden fir”). The growth period is more than 30 years, the density is high, the material is hard, and the nail holding power is stronger. The plate has a double-medium plate structure, and the plate has high static bending strength, which is one of the products with the lowest deformation rate in the domestic market. In addition, according to the inspection by the authoritative department, the formaldehyde emission of Penghong plate is ≤0.3mg/L, which is better than the E0 standard specified by the state (formaldehyde emission ≤0.5mg/L).

Choose Penghong Ecological Board to protect your health and build your home


Rope Furniture

rope weaving, webbing furniture, polyester and olefin material make the rope are look natural and more comfortable when you touch on the sofa.

rope weaving furniture, webbing furniture

Golden Eagle Outdoor Furniture Co., LTD. , https://www.gepatio.com