What should I do if there is no top cabinet?
[ Chinese wardrobe network ] 1, the structure of the straight cabinet
1) The combination of the panel wardrobe is a side panel top (bottom) panel, and the connection between the side panel and the top (bottom) panel is connected by a three-in-one and a wood tip. There are foot lines on the front and back of the wardrobe, and the height of the foot line is 70mm.
2) The wardrobe should be tricked. If there is no top cabinet, add a 18mm thick 180mm wide upper backing plate to the upper rail of the door, and add a 18mm thick 110mm wide underneath. The lower pad of the lower pad is mounted on the lower rail of the door.
3) For the side panel of the closet of the wardrobe, the top (bottom) board is a cabinet of 490 mm deep, the back board has a groove of 15 mm, and the groove width is 6*6 mm deep. The deck depth is 475 mm. For the side panels, the top (bottom) panels are 550 mm deep cabinets, the back panel has a slot of 15 mm and the slot width is 6*6 mm deep. The deck depth is 485 mm.
2, the structure knowledge of the top cabinet
1) The wardrobe should be equipped with a top cabinet, and the upper rail is directly mounted on the bottom panel of the top cabinet; however, it is necessary to add a 18mm thick 110mm wide lower backing plate to the lower rail of the door.
2) The total depth of the top door is 600mm, the side plate is 580mm deep, the back plate is 15mm, and the groove width is 6*6mm deep. If there is a middle side panel is 565mm.
3, the structural knowledge of the corner cabinet
1) Because the structure of the corner cabinet is relatively special, it should be designed as a separate cabinet. The left and right sides cannot share the side panels with the adjacent cabinets. Two 120mm wide vertical plates are needed at the corners of the back to reinforce and install the backboard.
2) The laminate of the corner cabinet is a whole board, and then processed and cut into L-shaped, the foot strip is 70mm height, and the cabinet structure should pay attention to the two 120mm wide vertical boards on the back.
3) The corner cabinet is generally only suitable for the cloakroom. If you want to do the trick or open the door, please consult the relevant personnel of the wardrobe development department.
4, the structural knowledge of the arc cabinet
1) The arc cabinet is a separate cabinet. It cannot share the side panel with the adjacent cabinet. If it is a 490*490mm cabinet. The side panel is 490mm, and the back panel is 472mm.
2) The foot line of the arc cabinet is a whole, 70mm (H).
Outdoor Swing Set using rattan hand weaving one by one and aluminum rush resistant frame, with stronger steel support with rust-proof outdoor powder-coated.
Outdoor Swing Set make your garden more beautiful . Rattan fibers are smoothly double woven around concealed powder-coated aluminum frames. Gently angled backs and wide arms encourage restful lounging. The industry`s best high-performing fabrics encase the thick, double-wrapped foam cushions.
· Traditional forms with a spacious, inviting scale
· Handwoven premium resin wicker UV resistant
· Rust-resistant powder-coated frames
· Cushions included with 30 density sofa foam
· Versatile tempered glass tables
· Cushions also available with 100% waterproof fabric.
Outdoor sofa Furniture contain sectional sofa, deep seating sofa, round or semi-round sofa furniture, and garden set.
If you have any questions, please contact with us directly. Outdoor Sofa Furniture are produced
by Golden Eagle Outdoor Furniture With High Quality and Good Appearance. Welcome you can visit our Factory.For any inquiry,Please send mail directly to us.
Outdoor Swing Set,Wicker Outdoor Swing Set,Patio Outdoor Swing Set,Garden Outdoor Swing Set
Golden Eagle Outdoor Furniture Co., LTD. , https://www.geoutdoorfurniture.com