[ Chinese wardrobe network ] Xiaobian found that cloth wardrobe is more and more common in modern home decoration, this is because the cloth wardrobe assembly is more convenient, and economical and practical, does not take up too much space, can store a lot of clothing, It is especially suitable for owners who often move or are small-sized, so they are favored by many owners. But how to install and maintain the cloth wardrobe? This article will give you a detailed introduction.
Before we buy a cloth wardrobe, we must first learn to install a cloth wardrobe, so that you can buy it without asking someone to assemble it. Next, let's take a look at the installation method of the cloth closet with the decoration net Xiaobian!
First, the installation of the cloth wardrobe
For the installation of the cloth wardrobe, basically the chassis is installed first, then the rest of the shelves are installed, the whole skeleton is installed, and then the cloth is laid from top to bottom, pay attention to the position of each small hole, and then install the cloth. Install some pipes inside the wardrobe, and finally wipe the cloth to complete the installation of the cloth wardrobe. First find the pipes with the same type of labels on the cloth wardrobe, put them together, if there are no labels, they are divided according to the length and length. The installation of the shelves is generally used with long and short tubes.
1. Locate the bottom part, first install the 4 tubes of the flat part of the plastic part, then insert the 4 long tubes into the 4 holes of the plastic part and lay them flat on the ground.
2. Open the zipper of the cloth cover. There are 4 small holes at the bottom of the cloth cover. Put the 4 holes into the four pipes erected on the bottom frame and pull the cloth cover from the bottom to the top.
3. At this time, the cloth cover is placed on the outside, and then the interior of the cloth wardrobe is assembled. First install the remaining tubes one by one, install the top frame, and then pull the cloth cover up and cover the top frame. Note that the assembly of the top plastic part and the long and short tube is the same as that of the bottom frame. Be sure to pay attention to the position of the long and short tubes, otherwise it will be reworked at the end.
4. Adjust the cloth cover and straighten the cloth until the cloth is flat without wrinkles. At this time, the installation of the cloth wardrobe is completed.
Universe Doll Doll,Universe Doll Sd Size Doll,Universe Doll Msd Size Doll,Universe Doll Ball-Jointed Doll
Changchun Huadu Network Service Co., Ltd , https://www.legenddollbjd.com