The barcode printer has changed a ribbon, there is a word on the ribbon, the printed paper is blank, how to adjust it?

The barcode printer has changed a ribbon, there is a word on the ribbon, the printed paper is blank, how to adjust it?

problem:

After using a barcode printer, I changed the ribbon, there is a word on the ribbon, the printed paper is blank, what is the reason and how to adjust it?

answer:

There are words on the ribbon and no words on the paper. The reasons and adjustments are as follows:

1. The carbon direction of the carbon ribbon is wrong.

Bar code printers usually use external carbon ribbons, and after the device is installed, the carbon surface should be in contact with the surface of the paper. There are no words on it.

Adjustment: Change the external carbon ribbon and carbon ribbon device.

2. The carbon ribbon does not match the paper.

Usually when using resin ribbon to print coated paper labels, due to the incomplete matching of the material, the printer density should be adjusted to the highest and the printing speed to the lowest to print the content. , There will be a phenomenon that there is a word on the ribbon and no word on the paper.

Adjustment: Change the matching ribbon, or increase the printer density.

3. The printer density and speed are not suitable.

Usually when using resin ribbon to print PET / PE / synthetic paper, this type of data requires a relatively high transfer temperature during transfer. When the density adjustment of the barcode printer is relatively low, there will be words on the ribbon, and There is no word on the paper.

Adjustment: Increase the printer density.