Share the advantages and disadvantages of five kinds of artificial boards, which is better for the top ten plates?

Household boards are often referred to as wood-based panels, which are made of wood from the corners of the process, mixed with other fibers. As wood becomes more and more rare and precious, wood-based panels that meet the sustainable development concept have gradually become the most commonly used panels in decoration. However, wood-based panels generally have problems such as formaldehyde easily exceeding the standard. In order to create a healthy and environmentally friendly home, it is necessary to be cautious when selecting artificial boards. The bosses who have been selling the plates for 20 years have been consulted. The five materials are too deep, and the most suitable ones are selected. important.

 

First, the introduction of commonly used artificial panels

There are many types of wood-based panels, such as plywood, large core panels, veneers, fiberboards, and particleboards. Let's take a look at the features of the five main panels.

1 , plywood introduction

The plywood is a plate which is formed by rolling and cutting the logs in the direction of the annual ring into a large sheet, which is dried and glued, and then laminated according to the principle that the wood layers of the adjacent veneers are perpendicular to each other. The outermost front panel is called a panel, the reverse side is called a back panel, and the inner layer is called a core panel. Commonly used are plywood, plywood, nine plywood, and thirteen plywood. The market is commonly known as three PCT, five PCT, nine PCT, and PCT.

The use of different thickness of plywood decorative Engineering: typically used to make plywood Door, window cover, baseboard, wall panels and furniture made of wood surface layer; five splint be higher if desired, can be replaced by five splint The three plywood is used as the surface layer ; the plywood is generally used for the base layer of the baseboard, the door sleeve cutting, the window cover base layer, the furniture base layer and the like.

Advantages: high strength and good bending resistance. In some structural parts that require load bearing, the use of a thin core plate will be more intense.

Disadvantages: Poor stability due to the consistency of the core material. This makes the deformation of the thin core plate possible. Therefore, the thin core plate is not suitable for a single-sided portion, such as a cabinet door.

2 , large core board introduction

The large core board, also known as the blockboard, is made by cutting the logs into strips, splicing into cores, and processing the outer surface materials, generally in a five-layer structure. According to the number of layers, it can be divided into three kinds of plates, five- ply boards, etc .; according to the tree species, it can be divided into Liuye, Zhangmu, teak, etc .; and according to the surface processing conditions , it can be divided into three types: single-side sanding, double-sided sanding and no sanding; Wood products essential for wall decoration, roof decoration and fine wood decoration in home decoration, mainly used as furniture panels, door leaves, door frames, keel frames for window frames, etc.

Advantages: The plate of the machine is subjected to large pressing force, the gap is very small, the splicing is flat, the bearing capacity is uniform, long-term use, compact structure and not easy to deform.

Disadvantages: Hand-assembled products are manually inserted into the splint. The strips are subjected to less pressing force, uneven splicing, large gaps, poor nail holding force, and cannot be sawed and processed. Projects, such as cushioning boards for solid wood flooring.

3 , the introduction of the veneer

The veneer is called a decorative veneer veneer plywood. It is a surface that is cut into a certain thickness by peeling natural wood or technical wood, adhered to the surface of the plywood, and then hot pressed to form a surface for interior decoration or furniture manufacturing. material. The classification is divided into natural wood veneer veneer and artificial veneer veneer; natural wood veneer veneer has natural wood pattern, natural texture pattern, large variability and irregularity; artificial veneer veneer texture is basically straight texture or pattern rule

Features: It not only has the beautiful pattern of wood, but also makes full use of wood resources and reduces the cost.

4 , fiberboard introduction

Fibreboard is a kind of board made of wood or plant fiber as the main raw material, through fiber separation, sizing, drying, paving, hot pressing, sawing and inspection. It is one of the leading products of wood-based panels. Classification is divided into hard fiber board, semi-hard fiber board and soft fiber board according to different properties; it can be used for indoor floor decoration, indoor wall decoration, decoration, hard fiberboard indoor partition wall and ceiling construction.

Advantages: Because it has been waterproofed, its hygroscopicity is smaller than wood, shape stability and antibacterial property are good ; it is easy to carry out finishing processing ; it is also a beautiful decorative plate.

Disadvantages: time is not long, once the tide is changed

5 , particle board introduction

Particleboard, also known as particle board, is a plate made of wood scrap ( wood shavings, sawdust or similar materials ) or non-wood plant scraps ( flax, bagasse, wheat straw, straw or similar ) and adhesive. . Classification is divided into hard fiber board, semi-hard fiber board and soft fiber board according to different properties; particle board is mainly used as partition wall, interior wall decoration board, furniture and construction industry in building decoration. In use, it is usually necessary to cover the surface of the particle board with a plastic veneer. The unfinished particleboard is mostly used for the baseboard of the siding, etc., and only serves as a support.

Advantages: Particleboard has good sound absorption and sound insulation performance ; good processing performance, can be processed according to needs or larger format of the board, according to the use of thickness specifications, no need to process on the thickness ; surface smooth, realistic texture, uniform weight, Small thickness error, pollution resistance, aging resistance, beautiful appearance, paint and various veneers ; no need to be dried.

Disadvantages: The density is heavier, so the furniture made by it is heavier ; the edge of the particleboard is rough and easy to absorb moisture, and the exposed parts of the edge of the furniture should be treated with corresponding sealing measures to prevent deformation ; the holding screw force is lower than the wood.

Second, 2019 China's top ten plate rankings introduced:

1 , fine artisan home improvement board

( "Fine wood craftsman" is part of Shanghai China and Hong Kong Wood Co., Ltd., is the original ecology as a concept, pushing the move "decoration did not taste" new ideas of high-end home improvement brands of wood 20 years only focus on home improvement wood, industrial Chain cover: home floor, wood-based panel, wardrobe, wooden door, home supporting hardware, smart lines, whole house customization, etc. The product sales network covers all parts of the country. It has won the top ten brands of Chinese plate and the top ten brands of China's plate industry. , building materials industry national brands such as the honorary title, its fine wood craftsman home improvement specialty stores nationwide brand board more than 800 radiation. high-end home improvement, with fine wood craftsman, not decoration taste, more people choose.)

2 , Shenzhou home health plate

“Shenzhou Homeland” brand is one of the brands of Shanghai Huagang Wood Industry Co., Ltd. After years of market operation, it has formed a good reputation in the market such as Shandong. Through the shaping of the “Shenzhou Homeland” brand, the company’s concept of “building a happy home and building a green garden” has entered thousands of households with excellent products. Its products include ecological board, blockboard, decorative panel, gypsum board, plywood, laminated timber, etc. Each series of products emphasizes green environmental protection and cares for health.

Camping Bags

Ningbo Wellcome Trading Co., Ltd. , https://www.huike-homecare.com