Sealing Machine A machine that is often used in the industrial and food industry. After the packaging container is filled with items, the sealing of the container is often handled on the sealing machine. In the process of use, the sealing machine should pay attention to the following 11 aspects to avoid unnecessary damage to the sealing machine.
1, not suitable for metal containers and metal cover, but can not put on the metal table press the start button, otherwise it will damage the machine.
2, before the power supply must be inserted into the induction aviation plug, and lock the screw.
3, the use of single-phase three-wire power cord, for the operator's safety, be sure to use a single-phase three-wire power outlet, the workplace must be dry ground to maintain insulation.
4. It is equipped with automatic over-heat protection function. When the temperature inside the machine is too hot, the buzzer sounds “Anomaly protection (PRO.MD.)†and the yellow indicator light is on. At this time, the main power switch should be turned off, and the standby cool down. After the buzzer stops, continue working.
5. During the working process, you should always touch the surface of the sensor head to check if it is overheated. If it is found to be hot, you should stop heating. After cooling, work again (cooling can be done without turning off the power). When the “WARMUP†green indicator light is off, please Do not press the start button to avoid false triggering. After the unit's work is completed, turn off the power switch on the panel.
6, with 5A fuse, not more than 5A insurance instead.
7, there is high pressure, the bottom board is charged, it is strictly forbidden to repair, in order to avoid personal shock.
8. Before use, if there is any bare wire, you should stop using the machine.
9, equipment, transportation, storage, use can not hit, heavy pressure, damp.
10. When the product is unpacked for inspection and acceptance, if it is found that the product's parts are inconsistent with the packing list under normal shipping and packaging conditions, it should contact the company promptly.
11. According to the instruction manual, the operation should be clearly understood in advance. If the product manufacturing quality problem is found out, explain to the company within the stipulated time limit. The device is guaranteed for six months and is responsible for maintenance.
Note: There is limited current protection in the machine. When the area of ​​the sealing aluminum foil is too large, or close to the induction coil, the output is automatically shut off. The buzzer sounds in the machine and the panel “abnormal protection (PRO.MD.)†The yellow indicator lights until it recovers.