The correct way to apply for CE certification is as follows:
1- First, go to the EU website to learn about CE certification. The EU New Method Directive website: CE is a compulsory certification of the European Union. All safety-related products sold in the EU require CE certification. There are many CE certification bodies authorized by the EU. Each EU member state has several authoritative laboratories or certification bodies that are authorized by the European Union to be CE certified and given an authorization code. For example, SGS 0353, IG 0407, TUV 0035, SZU 1015.
There are 27 mandatory orders in the EU, see the EU website.
Http://ec.europa.eu/enterprise/newapproach/nando/index.cfm?fuseaction=directive.main#
Each of these institutions is licensed in a different scope. Not all organizations with EU-licensed codes can do all 27 instructions, and their scope of authorization is also announced on the EU website.
2- The secondary machine for sanding machine CE certification is based on the mechanical command MD and the low voltage command LVD.
Please understand that the sanding machine for woodworking machinery belongs to the scope of the Machinery Directive. In addition, because it has 380V power, it is also covered by the EU Low Voltage Directive. The EU website lists all the certification bodies authorized to make mechanical instructions: http://ec.europa.eu/enterprise/newapproach/legislation/nb/en98-37-ec.pdf You can choose one of them to apply Their certification.
3- Sanding machine certification requires two aspects of safety assessment. Mechanical structure and low voltage electrical safety.
4-standard European standard for sanding machine CE certification: EN ISO 12100-1; EN ISO 12100-2; EN 60204-1.
5- sanding machine CE certification requires technical information to be prepared:
â–¡ Series product difference comparison data
â–¡ Main function description of series products
â–¡ Mechanical specification sheet
â–¡ Mechanical appearance dimension drawing
â–¡ Circuit diagram and electrical component table
â–¡ Oil pressure circuit diagram (if this structure is not considered, this item is not considered)
â–¡ Oil pressure component table (if this structure is not considered, this item is not considered)
â–¡ Pneumatic circuit diagram (if this structure is not considered, this item is not considered)
â–¡ Pneumatic component table (if this structure is not considered, this item is not considered)
â–¡ Operation manual
Note ̇ The above technical data is available in English.
The surface form needs to be a standard surface.
The symbols used in the relevant drawings need to be converted to European symbols.
6- sanding machine CE certification requires time.
Usually, after preparing the above information, it takes 2 weeks to review it by a European certification body. It is expected that it will take 1-1.5 months from the start of the application to the issuance of the certificate.
7-Sanding machine CE certification after CE certification. The factory can print the self-adhesive CE mark or the bronze and aluminum CE mark on the machine. The size is not specified, only required to be no less than 5 mm, attached to the obvious position. In addition, the CE nameplate is also required on the nameplate of the machine.
Stainless Steel Barrels,Stainless Steel Drums,Ss Barrel
Jiangmen Junerte Stainless Steel Kitchenware Co.,Ltd , https://www.jetkitchenwarejm.com