[ Chinese wardrobe net ] Many wardrobe users have encountered the problem of wardrobe deformation. Many people think that this is caused by the poor quality of the whole wardrobe, but this is not inevitable. The whole wardrobe will be deformed, which may be raw materials and processing skills. Well, it may be that the user did not pay attention to protect the overall wardrobe during use. Especially in winter, it is an important time for the maintenance of the wardrobe. For details, please refer to: How to maintain the overall wardrobe in winter
1. Parts are stacked to cause deformation.
In the production process, some operators are convenient for the drawing, stacking the plates at random, or stacking the plates with uneven plates, and even leaning the plates against the wall, causing the plates to enter the next process. It was previously deformed due to its own weight.
2. The finishing process causes deformation.
During the finishing process, due to improper use of the process and raw materials, the plate is deformed and deformed as the internal stress of the coating changes.
3, the effect of finishing putty.
In the process of painting the door parts, many manufacturers use pig's blood putty or glue to prepare the putty in order to reduce the cost. Because these two kinds of putty contain a lot of water, the substrate commonly used for plate furniture - medium density fiberboard and particleboard The hygroscopicity is particularly strong, so when one side of the door panel member is not put with putty and the other side is coated with such a water-rich putty, the door panel member is hygroscopic and deformed.
4. The impact of the drying process.
Many manufacturers are in production. When the board is coated with putty or paint, it should be placed on the drying rack for natural drying. If the rod of the drying rack is too sparse or uneven, the door parts will be dried in the paint. Bending deformation was found during the process.
5, improper coating treatment caused the deformation of the plate furniture parts.
The influence of the internal stress of the coating will form a certain coating after curing. Even if there is no external force, an internal stress will be generated. If the internal stress is not handled properly, it will become the main cause of bending deformation of the door component. one.
Second, the daily maintenance of the wardrobe
1. Avoid the use of irritating and corrosive chemicals such as alcohol and detergents that are easily damaged by wood.
2, if you want to wax, it is best to choose a higher concentration of solid, silicone-free wax, so as not to damage the paint surface.
3. Ultraviolet rays are also destructive to wooden wardrobes. Therefore, it is necessary to use cloth or curtains to avoid sun exposure.
4, wooden wardrobe, usually just wipe with a clean rag, but if there is dirt, you can use soap or neutral detergent, wipe with a damp cloth.
Harvest,Underware Storage Box,Washable Diy Underwear Bin,Lingerie Drawer Organizer,Multi Compartment Storage Container
HISMOK(SHENZHEN)TECHNOLOGY CO.,LTD , https://www.willtrademat.com