The stamp with automatic ink is very convenient to use, does not need ink pad, and the stamping effect is good, but when the seal ink is used up, how to add ink, how to add ink? The following small series will introduce you to everyone:
    How to add ink to ink pad, method steps:
1. First we have to find the fuel filler and open the fuel filler.
2. After opening, you need to add special ink
3. Tilt the stamp 30 degrees
4. Align the ink outlet with the fuel filler and extrude the ink. Pay attention to tilt the seal by 30 degrees to ensure that the ink is evenly covered throughout the seal.
5. After adding the ink, remember to cover the fuel filler cap
6. After finishing the ink and stamping, it is very bright, perfect
Maintenance:
1. Need to stir the ink often. When the ink is stored for a certain period of time, the ink will float up, so it should be stirred frequently to make the printing oil and the printing even.
2. The ink needs to be placed in a non-cold place. The ink pad is chilly and should be placed in a warmer place in winter.
3. Need to add white castor oil frequently. The ink is used for a long time, the oil is getting dry, and the white castor oil can be added and stored for a long time. However, avoid using new oil to prevent extrapolation of ink.
4. The ink is stored in porcelain utensils. The ink is best stored in a porcelain jar. Because the porcelain cylinder does not seep oil, it can maintain the quality of the ink for a long time.
I believe that through the introduction of the above, we understand how to add ink and maintenance methods to the ink, I hope to bring you help.
We can make Metal Post,Steel Post,Stainless Steel Post,Post Plate,Boallard Post,Aluminum Post,Guard Post for you.
Metal Post,Steel Post,Stainless Steel Post,Post Plate,Bollard Post,Aluminum Post,Guard Post
MGX Metalworks Co., Ltd. , https://www.metalmgx.com