[ Chinese wardrobe net ] Before installing the hinge of the cabinet door, it is necessary to determine that the type of hinge of the cabinet door is half cover, the full cover or the inner cover can be installed. Before installing the hinge of the cabinet door, the minimum margin of the hinge installation of the cabinet door must be determined. When talking about this and installing the cabinet, the furniture installation master will install it together, but the website Xiaobian still decided to teach you how to install the hinge of the cabinet door through the way of illustration and text.
First, the straight cut theme - cabinet door hinge installation steps are as follows:
1, install the hinge cup
a. As shown in the figure, there will be a large hole in the door position before installing the hinge cup. This hole is determined according to the type and size of the hinge. It can be placed on the top and compared with the installation position and then punched. .
b. Install the hinge cup. The common method is to install and fix the self-tapping screws with flat countersunk chipboard.
c. Install the hinge cup press type one, the hinge cup belt is up, and the machine is pressed to reduce the opening of the entry plate and then fixed.
d. Install the hinge cup without tools. The hinge cup has an eccentric plug. After the manual opening of the entry plate is reserved, the hinge cover can be installed and disassembled by pulling the decorative cover without tools.
e, install the hinge cup press-fit type 2, the hinge cup with the plug, after manually opening the entry plate to reserve the hole, use the screw to rotate the plug screw to fix.
2, hinged seat installation
a. For the same reason, the hinged seat is also pre-opened. You can compare the position and mark the hole (note that the hinge is installed vertically).
b. The hinge seat is fixed by screws. Use the particle board screws, European-style screws or pre-installed special screw plugs, and screw them in with a screwdriver.
c. The hinged seat is fixed by press-fit type. This is very simple. It can be directly pressed into the hinged seat by the machine.
3, cabinet door hinge installation
a, tool-free installation cabinet door hinge, suitable for quick-fit hinges, using the lock way, you can install and remove the door panel without any tools.
b. Fix the hinge of the cabinet door by screwing. Insert the hinge cup on the door of the cabinet into the ordinary hinge and fix it with screws.
c. Cabinet door hinge tool-free installation specific installation steps (, screw fixed installation cabinet door hinge can refer to the right side of the diagram to see the other half step)
Step 1. Connect the hinge and the hinge arm according to the arrow mark in Figure 1.
Step 2: The tail of the hinge arm is buckled downward.
Step 3: Press the hinge arm to complete the installation.
Step 4: Lightly press the position indicated by the arrow to disassemble the hinge arm.
In fact, the hinge installation is not difficult. It is difficult to select the size of the hinge installation and the minimum margin for the installation of the hinge door. If the selection is not appropriate, the door may not be closed, bumps, etc. Finally, the cabinet is used. The hinges brought by the matching, so that the furniture installers installed in the closet or cabinet will be installed together, and do not need to worry.
Baby Care Products,Portable Baby Care Organizer,Baby Care Set,Baby Care Activity Set
Dongguan Junkai Packaging Products Co., Ltd , https://www.diystoragecase.com